|
|
Post by iamwill on May 5, 2023 16:39:09 GMT -6
Looking for an autofarm sa module (wheeled)for an A5 system. Had one give up and sent it away to get repaired but no luck. Apparently no schematics available for it and without a module the rest of the system is only good for target practice. So if anyone has one collecting dust I would be interested even in a complete system.
|
|
|
|
Post by cptusa on May 5, 2023 19:55:54 GMT -6
I think I have what you need. Mine was an Ag Leader Integra/Paradyme combo, should be the same thing.
|
|
|
|
Post by iamwill on May 27, 2023 19:01:24 GMT -6
Thanks cptusa ended up borrowing one from a neighbor who had a tractor down. Planting beans last week Friday had two tractors that were loosing position at the same time in the same field. One on the ridged and one on the planter. Phoned a neighbor and he was having the same issue with his trimble system at the same time so who knows what was going on, all rtk systems.
|
|
|
|
Post by christianh on May 31, 2023 17:46:24 GMT -6
Are you talking about the steering wheel motor/gear module? What part do you need? I have clutches, motors here.
I also 3d print the gears and have those and bushings.
|
|
|
|
Post by iamwill on Jun 5, 2023 21:29:13 GMT -6
Was talking about the SA module. Not exactly sure but I think it takes the instructions from the monitor and steering angle sensor and opens and closes the hydraulic steering block to steer the tractor. Ended up buying a used system at an auction with a good module but would still like to find another. Also would like another hydraulic steering valve as the system I bought came off a tractor with an integrated valve.
|
|
