|
|
Post by skfarmboy on Jun 4, 2022 17:26:31 GMT -6
Having issues with a viper pro in my rogator. Can't program the sat change by going in through the monitor. The screen to do the changes comes up but says waiting for connection. Left it on for over an hour and it didn't progress any, tried severaltimes. I can go in through the actual smartrax box and change it but when I shutdown it returns back to the old sat setting. Also the accuboom stopped working at the same time so the booms do not turn on and off by themselves. It still paints where I have sprayed but if I go back over the same spot it just keeps spraying. Not sure what to make of it but flicking switches all day sucks. You need to make the satellite change in the smarttrax box. Did you hit the enter key after you changed the satellite? I just changed mine this morning on a Viper Pro with a 300 receiver and everything seems to work fine.
You probably did not make sure the accuboom box was checked off when you set up your field. I know I had the recheck it on the first field I setup after changing to satellite 135.
Hope this helps.
|
|
|
|
Post by iamwill on Jun 4, 2022 18:50:01 GMT -6
I know I hit the enter key for sure will have to check if accuboom was enabled. The first time I changed it was on a Sunday so nobody was around and I just kept pushing buttons on the smartrax box until I was able to get it changed. When it didn't work the next time I got hold of the local agco dealer and he sent me the instructions on how to do it properly from raven, which is through the monitor.
|
|
|
|
Post by iamwill on Jun 4, 2022 18:52:22 GMT -6
Skfarmboy did yours change back after you shut it down?
|
|
|
|
Post by skfarmboy on Jun 4, 2022 21:18:41 GMT -6
Skfarmboy did yours change back after you shut it down? No |
|
|
|
Post by OptimallyDismal on Jun 10, 2022 6:09:22 GMT -6
My EZ-guide 250 needed the correction sat changed from 138 to 135 to work (should be interesting to see how bad my hand steering was) this video shows how to do it:
|
|
|
|
Post by garyfunk on Jun 10, 2022 8:13:52 GMT -6
Me too. Put a little fertilizer on some hayland and had to make that change when I fired up the 250.
|
|
