Post by rod on Mar 3, 2021 20:19:15 GMT -6
Looking at installing a base station for RTK & was wondering about the aerial type on the base.
I know 9bdi give good (long) range but there’s a compromise when the signal has to “bend” over hills & trees.
Usually run 6.6dbi aerials on machines. Is there a problem if the transmitting aerial & the receiving aerials are not the same dbi?
I know 9bdi give good (long) range but there’s a compromise when the signal has to “bend” over hills & trees.
Usually run 6.6dbi aerials on machines. Is there a problem if the transmitting aerial & the receiving aerials are not the same dbi?
