Post by jaymo on Sept 8, 2020 21:11:47 GMT -6
The yield monitor on our CR9070 started acting up today. It will suddenly show 0 bushels while going in a full width cut for awhile.
Sometimes it will show some random number between 0 and 10 then suddenly jump back up to the correct reading.
First thing I checked was that the clean grain elevator hatch hadn't fallen off or something obvious but its definitely not that kind of problem.
Also checked the plate at the top of the elevator for something stuck in there but nothing obvious.
I would guess those yield monitors are similar on pretty well any CR machine.
This is in straight cut canola.
We have owned this machine for a number of years and never had any problem with the yield monitor until now.
Anyone have any idea what could be going on?
Sometimes it will show some random number between 0 and 10 then suddenly jump back up to the correct reading.
First thing I checked was that the clean grain elevator hatch hadn't fallen off or something obvious but its definitely not that kind of problem.
Also checked the plate at the top of the elevator for something stuck in there but nothing obvious.
I would guess those yield monitors are similar on pretty well any CR machine.
This is in straight cut canola.
We have owned this machine for a number of years and never had any problem with the yield monitor until now.
Anyone have any idea what could be going on?
